36
135 mm
90 mm
180 mm
Adjusting the stapling heads
The device has two stapling heads that can be attached at spacings of 90, 135 and 180 mm.
Switch off the device at the power switch. Disconnect the mains plug.
Open the bottom cover. Attach the stapling heads (secured with a wing bolt) at the positions you
require:
For corner stapling, you have to remove the head that will not be used:
To do this, start by disconnecting the sensor
plug from the stapling head.
Insert the sensor plug into the dummy socket
for storage.
Unscrew the wing bolt and remove the stapling
head.
