KRUG+PRIESTER EBA 4860, Руководство по эксплуатации

Страница: 14 / 48

- 14 -
B
A
B
E
C
D
A
T
C
Position the main switch to "I" (
A
). Insert the
key for the control system and move it to the
right ( B ). The machine is now ready for use.
Press START ( C ).
Machine will automatically go to the start
position.
Bright LEDs illuminate the working area ( D ).
The LED button (
E
) has 4 switching steps
Press 1 x  brightness 3
Press 2 x

brightness 2
Press 3 x  brightness 1
Press 4 x  OFF
The light can also be switched off by pressing
and keeping pressed the symbol a few
seconds.
The measurement is set either with the hand-
wheel (
A
) or by programming (
B
) the cutting
measurements. Measurement is shown on
the display in inches or cm ( B ).
Startup