KRUEGER VPQ-2, Руководство по вводу в эксплуатацию

Страница: 8 / 10

Krueger | 1401 N Plano Rd | Richardson, TX 75081 | 972.680.9136 | kruegerinfo@krueger-hvac.com | www.krueger-hvac.com
Commissioning Guide for VPQ-2
Page: 8 of 10
Motor Settings
»
Click on the diffuser you wish to adjust.
»
Click the folder labeled “ Type 10 ” on the left and
expand the “ Process ” folder.
»
Click “ Motor Min ” and enter desired motor minimum
percentage, 0-100. See Figure 4 below.
- You may also set a motor maximum percentage.
Thermostat Settings
»
Click the diffuser with temperatures above the device.
»
You will see two folders on the left. Click the one
labeled “ Type 7 ”.
»
Check the loop number and ensure it matches the
value of the diffuser previously setup.
» Click the “ Process ” tab; you can adjust your setpoint
and setpoint limits. Remember to click “ Write ” after
any changes. See Figures 1 and 2 below.
- To maximize the range of operation enter, a high delta
between your max and min setpoint limits.
»
Click the “ Setup ” folder and click “ Edit Mode ”, place
a check mark in the “ Setup Menu Enable ” only; click
“ Write ”. See Figure 3 below.
Diffuser Commissioning & Setup (Continued)
Figure 1 Figure 2 Figure 3 Figure 4