PLUMBING PRODUCTS
INSTALLATION GUIDE
Krowne Metal Corporation
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
[email protected] • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
GENERAL MOUNTING INSTRUCTIONS
1.
Turn off water supply at main source.
2. Hand tighten all parts prior to tightening with
a
wrench. Do not force the parts together.
3. Handle plated surfaces with care. Do not scratch
with tools.
Assemble Faucet to Couplings
Carefully orient, mount and hand tighten the
faucet to the couplings. Make sure that you use
the washers provided and place them between
the faucet body and the coupling. Make sure that
you maintain the alignment of the faucet body and use a
wrench to tighten the flange against the wall or deck.
Assemble Couplings to Sink Wall or Deck
The hose reel is equipped for universal mounting so that
it can be mounted on a structurally sound floor, wall or
ceiling; whichever provides
maximum performance. The hose guide arm must be
rotated to a position that allows the hose to feed through
the roller brackets with minimal bending. Replace the
fasteners. When rotating
guide arm, the U-bolt must be placed in the proper loca-
tion, otherwise the reel might “latch or lock out” during
use.
WALL MOUNT
WALL MOUNT with SINGLE VALVE
DECK MOUNT
DECK MOUNT with SINGLE VALVE
DECK MOUNT
Rev. 09/2011
No. PLUMB-1.00
GENERAL ROYAL SERIES MOUNTING INSTRUCTIONS
Thank you for purchasing a quality Royal Series plumbing product from Krowne Metal Corporation. For installation instructions we will assume the hot and
cold water supplies end in 1/2” nipples. If you are installing a Wall Mount Faucet, we suggest that you use Krowne Metal’s Mounting Kit (#21-190L).
Printed in the USA