Kronoterm WPL-16-K1 NT, Инструкция по эксплуатации

Страница: 12 / 32

©Termo-tehnika, d.o.o.
ID.: 17-17-16-4517-01
11
4.2017
6.2 WPL-23-K1 in WPL-31-K1
MARK OF THE ELEMENT CONNECTING CLIPS DESCRIPTION
X1 Connecting clip
, PE
Grounding wire
N Neutral wire
L1, L2, L3
Connecting phases of the supply cable
4,5
Safety thermostat
RV 6 Reversible valve
7 Connecting clip ~ 230 V
N Neutral wire
GND Functional grounding
F2, F3, F4, F5 Circuit Breakers
MD3
Input/output module MD3
JMP Position of jumper (on second position)
M1 Q1 Heat source
Q2
Connecting compressor 1.
Q5 Additional source – electrical flow heater
RV Q6 Reversible valve
Q11
Valve for cooling
A1 Return temperature sensor
A3 Compressor temperature sensor
A4
Evaporator temperature sensor
A5 Temperature sensor for outdoor temperature
A6 Temperature sensor of the supply pipe
D1 Overvoltage protection
VT D2
High-pressure switch
NT1 D3 Low-pressure switch 1 in heating mode
NT2 D3
Low-pressure switch 2 in cooling mode
PS D4
Flow switch
GND Functional grounding
TE1 Comuniction with the PLC
EG
Electrical flow heater
C1, C2, C3 Contactors
R1, R2 Relays
EMV
Electromagnetic valve
KF Phase control, voltage relay
M 1~ One-phase motor
M 3~
Three-phase motor
M1 Fan
M2 Compressor 2
TV
Thermal switch
Komp. zš
č
ita Compressor protection
GK1, GK2, GK3 Heating cables
WPL23-HT Only in high-temperature model