Krone KWT 1600, Оригинальная инструкция по эксплуатации, Страница: 66 / 96

10 Settings
10.2 Setting the working height
66
KWT 1600
Original Operating Instructions 150000169_04_en
Flattest spreading angle (II)
• Large scattering width
• Short crops
• Broad-spread crops
• Forage with less than 40% moisture content
INFORMATION
Type and source of the danger
Always insert the outer bolt (2) from the axle support in direction of the wheel arm (3).
KWG000-014
„ Remove the linch pin (1).
„
Pull out the bolt (2).
„ Bring the wheel arm (3) into the selected position between position I and position II.
„
Push the bolt (2) in and secure it with the linch pin (1).
Bolt in position l = steeper spreading angle
Bolt in position II = flatter spreading angle
10.2 Setting the working height
KWG000-013
ü
The machine is in working position , refer to page 55 .
ü
The machine is shut down and safeguarded, refer to page 25 .
„ Switch off the tractor and secure it against rolling away.
„
To reduce the distance (X) of the rotor tines (1) to the ground, turn the crank handle (2)
clockwise (+).
„
To increase the distance (X) of the rotor tines (1) to the ground, turn the crank handle (2)
anticlockwise (-).