Krone EasyCut R 360 страница 36 Скачать руководство пользователя | Manualshive

Страница: 36 / 86

background image

Operation

36

Pos: 66.7 /Überschriften/Überschriften 3/P-T/SSchutzeinrichtung herunterklappen @ 9\mod_1220881079079_78.docx @ 128594 @ 3 @ 1

10.2.1

Folding down the Safety Device

Pos: 66.8 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Fortschleudern von Steinen @ 84\mod_1318311844997_78.docx @ 733435 @ @ 1

DANGER! – Stones forcibly projected during operation

Effect: Danger to life or serious injuries.
•

Check the guard cloths regularly. Worn or damaged guard cloths must be replaced!

•

The protective equipment on the mowing unit, e.g. cloths and hoods, protects against flying
stones and similar objects, and also prevents access to dangerous parts. Because of this,
you must always move it to its protective position before starting work

•

Fold the side plate(s) down and secure with twist locks before use

Pos: 66.9 /BA/Bedienung /EasyCut/Schutze/Schutzeinrichtung herunterklappen Bild EC R 280/320 @ 207\mod_1386830558135_78.docx @ 1717077 @ @ 1

EC-401-0

2

Fig. 14

Pos: 66.10 /BA/Bedienung /EasyCut/Schutze/Hinweis Schutzeinrichtung herunterklappen Text EasyCut Heck @ 91\mod_1326102221529_78.docx @ 776946 @ @ 1

Ensure before use that the side panel (1) of the machine is folded down and that it is secured by
the locking (2). Adjust the locking, if necessary (refer to chapter Settings “Adjust Locking”).

Note

The side panel (1) and the locking (2) must be adjusted in that way that
•

the side panel folds down independently when swivelling the machine from transport
position to working position and that it is secured by the locking (2)

•

the side panel (1) slides independently from the locking when swivelling the machine from
working position to transport position and that the side panel is folded over to transport
position. Thus the transport height is reduced.

Pos: 66.11 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
34
35
36
37
38
...
»

Содержание EasyCut R 360























































































Отзывы:

Нет отзывов

Похожие инструкции для EasyCut R 360

Бренд: Yard-Man Страницы: 11

Бренд: Troy-Bilt Страницы: 20

Бренд: Jacobsen Страницы: 104

Бренд: Ransomes Страницы: 134

Бренд: Poulan Pro Страницы: 31

Бренд: Oleo-Mac Страницы: 292

Бренд: Snapper Страницы: 20

Бренд: McCulloch Страницы: 60

Бренд: Cub Cadet Страницы: 48

Бренд: Craftsman Страницы: 8

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 16

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 8

Бренд: Craftsman Страницы: 16

Бренд: Craftsman Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды