Krone EasyCut F 320 CV, Оригинальная инструкция по эксплуатации

Страница: 31 / 80

Start-up
31
Pos : 22.20 / BA/Ers tinbetriebnahme/ Eas yC ut/ Eas yCut 32 CV Float/ Anbau und Eins tell ung der Entl ast ungsf eder n Schrit t 3 @ 89\ mod_1321958507840_78.doc x @ 756874 @ @ 1
EC-392-0
a
1
3
1
2
Fig. 10
• Assemble the tension jacks (1) on the top link clevis (2) and adjust them to the maximum
value a = 230 mm
Pos : 22.21 / BA/Ers tinbetriebnahme/ Eas yC ut/ Eas yCut 32 CV Float/ Anbau und Eins tell ung der Entl ast ungsf eder n Schrit t 4, 5 @ 89\ mod_1321958644984_78.doc x @ 756930 @ @ 1
• Lift the mowing unit and fasten the chains onto the tension jack (1) with connecting links
(3). The connecting links should be as short as possible and the same on both sides.
• Lower the mowing unit. Measure distance X. It must be about 20 mm.
Pos : 22.22 / BA/Ers tinbetriebnahme/ Eas yC ut/ Eas yCut 32 CV Float/ Anbau und Eins tell ung der Entl ast ungsf eder n Schrit t 6, 7 EC F 320 C V @ 101\ mod_1330614142154_78.doc x @ 898193 @ @ 1
EC-418-0 EC-417-0
X
Fig. 11
Dimension x is too low: Lift the mowing unit; hinge the chain one chain link longer
Dimension x is too large: Lift the mowing unit; reduce the dimension of the tension jack
Lower the mowing unit. Measure the dimension X. Readjust it, if necessary.
• Separate surplus chain and attach it to an eligible point
• The guard cloth (1) must be tightened each time before using the mower so that it cannot
be caught by the conditioner auger
Pos : 22.23 / BA/---------------Seitenumbr uc h---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1