Krone EasyCut B 970, Оригинальная инструкция по эксплуатации

Страница: 80 / 98

14 Maintenance - Cutterbar
14.3 Check/change blades
80
EasyCut B 970
Original Operating Instructions 150000711_01_en
KM000-038
ü The machine is in the working position, refer to page 52 .
ü The machine is shut down and safeguarded, refer to page 24 .
„
Fold up the front guard, refer to page 49 .
WARNING! Risk of injury due to sharp blades! Wear suitable protective gloves.
„
Clean the area around the blades, cutting discs and mower drums.
„
Check wear limit.
ð If the dimension is X>13 mm , the wear limit is not reached.
ð
If the dimension X is ≤13 mm or the borehole touches the marking (1), the blade must
be replaced.
„ Fold down the front guard, refer to page 49 .
14.3.2 Changing blades for the “blade screw connection” version
KM000-044
ü
The machine is in the working position, refer to page 52 .
ü
The machine is shut down and safeguarded, refer to page 24 .
„ Fold up the front guard, refer to page 49 .
WARNING! Risk of injury due to sharp blades! Wear suitable protective gloves.
„
Clean the area around the blades, cutting discs and mower drums.
„
Remove the damaged or worn blade.
„
Check the fastening elements of the blade, refer to page 82 . Also replace worn or
damaged fastening parts.