Safety
2
Service life of the machine
2.3
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en
13
2.3
Service life of the machine
•
The service life of this machine depends on its proper operation and maintenance as well
as the operating and harvesting conditions.
•
By heeding the instructions and information in these operating instructions, permanent
operational readiness and a long service life of the machine can be achieved.
•
After each operating season, inspect the entire machine for wear and other damage.
•
Replace damaged and worn components before recommissioning the machine.
•
Carry out a full technical inspection of the machine after five years of machine operation
and make a decision on further machine usage taking the results of this inspection into
account.
2.4
Basic safety instructions
Non-compliance with the safety instructions and warnings
Non-compliance with the safety instructions and warnings may result in injuries and damage to
the environment and property.
2.4.1
Importance of operating instructions
The operating instructions are an important document and a part of the machine. They are
intended for the user and contain information relevant to safety.
Only the procedures indicated in the operating instructions are reliable. If the operating
instructions are not followed, people may be seriously injured or killed.
Before using the machine for the first time, read and follow all the "Basic safety instructions".
Before working, also read and observe the respective sections in the operating instructions.
Keep the operating instructions easily accessible for the machine user at all times.
Keep the operating instructions ready to hand for the user of the machine in the document
storage tube,
Hand over the operating instructions to subsequent users.
2.4.2
Personnel qualification of the operating personnel
If the machine is not used properly, people may be seriously injured or killed. To avoid
accidents, each person who works with the machine must satisfy the following minimum
requirements:
•
He is physically capable of controlling the machine.
•
He can work safely with the machine in accordance with these operating instructions.
•
He understands the method of operation of the machine within the scope of his work and
can identify and avoid the dangers associated with the work.
•
He has read the operating instructions and can implement the information in the operating
instructions accordingly.
•
He is familiar with driving vehicles safely.
•
For road travel he has adequate knowledge of the highway code and has the stipulated
driving licence.
