Krone EasyCollect 1053 Скачать руководство пользователя страница 40

Страница: 40 / 84

Driving and Transport

EasyCollect 753 / EasyCollect 903

EC903047

Fig. 25

During transportation / road travel the maize header must be raised.

To do this:
• Swing the plant divider into transport position.
• Swing the right-hand / left-hand side parts upward into transport position.
•

Switch off the engine and remove the ignition key.

•

Push the parking supports on right/left into the transport position (see chapter on
operation “Parking supports on right/left in transport position”).

•

Attach guards on right/left and front guards (see chapter on operation “Installing guard on
right/left” or “Installing the front guard”).

•

Connect lighting (see chapter on operation “Connecting indicators and position lights on
right/left”).

EasyCollect 1053

•

The EASYCOLLECT 1053 maize header must be placed on a special transportation
trailer for road transport.

•

The attachment must

not

be transported on public highways in the mounted state. For

transportation on public highways the front attachment

must

be placed on a special

transportation trailer.

Note

For further information, please consult the supplied "Transportation Trailer" operating
instructions

Содержание EasyCollect 1053





















































































Результаты поиска

Содержание EasyCollect 1053

Отзывы:

Похожие инструкции для EasyCollect 1053

Бренды по названию

Популярные бренды

Krone EasyCollect 1053, Руководство по эксплуатации

Результаты поиска

Содержание EasyCollect 1053

Отзывы:

Похожие инструкции для EasyCollect 1053

Бренды по названию

Популярные бренды