Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 49 / 448

Machine description 4
Description of pick-up functions 4.8
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en 49
Needle yoke
BPG000-015
The connecting rod (1) of the needle yoke is secured by a shear bolt (2) (left-hand side of the
machine).
The shear bolt protects the knotter needle and the needle yokes against load peaks.
4.8 Description of pick-up functions
BPG000-016
The pick-up (1) is used to pick up the crops.
The pick-up (1) starts to rotate when turning on the PTO shaft.
The pick-up (1) is raised and lowered via the single-acting control unit ( ) on the tractor,
refer to page 112 .
The pick-up (1) is equipped with guide wheels (2). The working height of the pick-up (1) is set
via the guide wheels (2),
refer to page 208 .
The bearing pressure of the guide wheels (2) can be adjusted to the ground conditions via the
spring (3),
refer to page 210 .
NOTICE
Damages to the guide wheels and increased wear at the pivot point of the pick-up if the
lowering of the pick-up is not limited
If the lowering of the pick-up is not limited by means of the depth limiters (4), the guide wheels
may be damaged or there will be an increased wear at the pivot point of the pick-up when
passing deep furrows.
„ Limit the lowering of the pick-up by means of the depth limiters (4), refer to page 209 .