Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 205 / 448

Driving and Transport 15
Parking the machine 15.6
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en 205
ü
For “Comfort 1.0” version: The self-steering axle is locked, refer to page 203 .
ü For “Medium 1.0” version: The self-steering axle is locked, refer to page 202 .
„
Shut down and safeguard the machine, refer to page 26 .
„
For “Medium 1.0” version: Lock stop cock “self-steering axle”, refer to page 113 .
„
Disconnect machine from tractor, refer to page 205 .
Æ
The hydraulic brake is released and the machine can now be manoeuvred.
15.6 Parking the machine
WARNING
Risk of injury due to the unsecured machine rolling away
If the machine is not secured against rolling away when it has been switched off, there
is a risk of people being injured by the machine rolling away in an uncontrolled
manner.
„ Secure the machine against rolling away with the parking brake ( refer to page 121 ) and
wheel chocks ( refer to page 123 ).
„
Apply the flywheel brake at the machine, refer to page 100 .
„
For “hydraulic support jack” version: Lower the support jack until the base plate rests on
ground, refer to page 120 .
„
Shut down and safeguard the machine, refer to page 26 .
„
For “mechanical support jack” version: Lower the support jack until the base plate rests
on ground, refer to page 120 .
„
For „ball drawbar eye Ø 80“ version: Unlock the locking of the ball drawbar eye on
tractor side.
„ Start tractor engine.
„
For „ball drawbar eye Ø 80“ version: The parking jack has to be lowered until the ball
drawbar eye does not rest on the ball-head hitch of the tractor anymore, refer to page 120 .
„
Switch off the tractor engine, remove the ignition key and take it with you.
„
For “drawbar eye” version: Lower the support jack until the drawbar eye is positioned
loosely in the hitching device of the tractor, refer to page 120 .
„
Loosen the safety chains on the universal shaft on the tractor side.
„
Disconnect the universal shaft on tractor side and put it down on the holder provided for that
purpose.
„
Remove the lighting cable.
„ Remove the power supply cable for the terminal.
„
Disconnect the hydraulic hoses and attach them to the support of the machine.
„
For “compressed air brake” version: Disconnect the red and yellow coupling head and
attach it to the support of the machine, refer to page 90 .
„
For “hydraulic brake (export)” version: Disconnect the connection for the hydraulic brake
and attach it to the holder on the machine.
„ With “hydraulic brake (export France)” version: Loosen the safety chain on the tractor
side.
„
For “drawbar eye” version: Lossen the hitching device according to the operating
instructions of the tractor manufacturer.
„
Drive the tractor carefully.