Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 71 / 134

Operation 8
Net wrapping 8.12
Bellima F 130
Original Operating Instructions 150000148_06_en 71
8.12.2 Insert net
WARNING
Risk of injury due to sharp blades at the cutting unit of the tying unit
You may injure your fingers and hands when inserting the wrapping and tying material or
working in the range of the cutting unit of the tying unit.
„ Always wear protective gloves when inserting the wrapping and tying material and when
working in the range of the cutting unit.
„
When working in the range of the cutting unit, work particularly carefully and prudently.
RPG000-018
ü The machine is shut down and safeguarded, refer to page 24 .
ü
You have swung the roll holder forward.
„ Unwind a section of the net (4) from the net roll (1), gather it at the end and guide it under
the deflection shaft (2) and over the deflection shaft (3).
„
Insert the net between the rubber-coated drive roll (5) and aluminium roll (7) into the tying
unit (6).
RPG000-019
„
Open the side hood (1) on the right side of the machine.
„
Open and secure the tailgate, refer to page 73 .
„
Rotate the drive wheel (2) clockwise until the net is visible under the tying unit approx.
100 mm in the bale chamber from the back of the machine.
„
If required, unlock the cutting unit of the net wrapping, refer to page 59 .
To set the number of net layers, refer to page 80 .