Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 59 / 134

Operation 8
Locking/releasing the cutting unit of the net wrapping 8.5
Bellima F 130
Original Operating Instructions 150000148_06_en 59
For the "Mechanical tying start unit" version
RP000-082
ü
The operating cable (2) is correctly guided to the tractor, refer to page 55 .
„ To initiate a tying cycle, pull the operating cable (2) while sitting on the tractor, keep pulled
until the round bale in the bale chamber has grabbed the twine.
Æ
The release lever (1) starts the tying cycle in the bale chamber.
For the "Hydraulic tying start unit" version
ü
Depending on the requirement, the tying start unit is set to net or twine tying, refer to
page 85 .
„ To initiate a tying cycle, actuate the control unit (green, 4+) in the tractor, keep pressed until
the round bale in the bale chamber has grabbed the twine.
8.5 Locking/releasing the cutting unit of the net wrapping
For the "Net wrapping and twine tying" version
Lock
As a precondition for triggering a tying cycle with twine tying, the cutting unit of the net wrapping
must be lifted and locked.
RPG000-041
ü The machine is shut down and safeguarded, refer to page 24 .
„
Move the lever (2) in the direction of the arrow.
„
Flip the stop piece (1) in the direction of the arrow.