Hardware description
1. NDF1 - NDF3 connectors
2. NDR1 - NDR6 connectors
3. MEASSURE OUT CONNECTOR
4. MANAGEMENT NETWORK CONNECTOR
5. 4x SFP+ 10GbE CONNECTOR
6. JOYSTICK
7. GROUND TERMINAL
8. DUAL PSU
9. LCD
NDF1 - NDF3 connectors
RF signals can be digitized for NDF streaming using the three NDF F-connectors. Over
each connector are three red LED that indicates the activity of each input. Each input
can have 3 activities.
The ACTIVE LED is indicate that the input is active streaming NDF data.
The LCD LED is active if the input is being displayed on the LCD display.
The MP LED is active if the NDF input is copied to the MEASSURE POINT OUT connector
www.kronback.com | [email protected]
NDX Manual - Hardware description
7 of 24
