SAFETY INSTRUCTIONS
1
3
SD 200 W/R
www.krohne.com
01/2016 - 4004155802 - AD Ex SD 200 W/R en
Safety instructions
1.1 General notes
This supplementary instructions applies to explosion-protected versions of the Loop powered
display. It completes the standard documentation for non-explosion protected versions.
The information given in this instruction contains only the data relevant to explosion protection.
The technical details given in the standard documentation for the non-explosion protected
versions remain unchanged unless they will be excluded or replaced by this instruction.
1.2 EC conformity
The manufacturer declares with the EC declaration of conformity, in which the applied standards
are also specified, on his own responsibility conformity with the protection goals of the ATEX
directive for use in hazardous areas with gas and dust.
The EC declaration of conformity is based on the EC type examination certificate:
You can download the EC Type Examination Certificate from the manufacturer's website.
1.3 Approval according to the IECEx scheme
Conformity with IEC standards was tested in accordance with the IECEx certification scheme for
Explosive Atmospheres acc. to IEC 60079-0:2011 and IEC 60079-11:2011 and IEC 60079-26: 2006.
The number of the IECEx certificate is:
You can download the IECEx certificate from the manufacturer's website or from the official
IECEx website www.iecex.com.
DEKRA 13 ATEX 0218 X
DEKRA 13 ATEX 0218 X
DEKRA 13 ATEX 0218 X
DEKRA 13 ATEX 0218 X
IECEx DEK 13.0086X
IECEx DEK 13.0086X
IECEx DEK 13.0086X
IECEx DEK 13.0086X
AD_Ex_SD_200_W_R_en_160107_4004155802_R02.book Page 3 Thursday, January 7, 2016 5:46 PM