Adjustment of the handle
The handle can be loosened and adjusted at the lower
closing hook with a hexagon spanner.
Accessories
For this model you can have the following accessories:
Handle
The handle is elegantly integrated on the moul-
ding below the door. Pull out the handle to
Self-closing door (BA 1)
The door is prepared with a self-closing function at the factory.
If you tighten the spring with the hexagon spanner, the door will
close automatically when you let go of it.
• Special elbow with wall sleeve and cover ring for SCAN 25
with revolving base (see separate instructions)
• Special adaptor for steel chimney for SCAN 25 with revol-
ving base (see separate instructions)
• Shaped floor plate (steel or glass)
• Connection piece for fresh-air intake (with firm base)
SCAN 25/25-5
SCAN 25 with revolving base (SCAN 25-5)
Mounting with elbow:
See separate instructions delivered with the stove.
Mounting with direct connection to steel chimney:
Should only be done in accordance with the instructions from
an authorised SCAN dealer. See separate instructions deliv-
ered with the stove.
The warranty is invalid if the above is not followed.
The stove (with firm base) can be prepared for an external air supply
where fresh air is let directly into the combustion chamber (can also
be done subsequently by the authorized dealer).
Combustion air %
Primary air %
Max. fuel, kg
Fuel consumption, kg/h
90
60
2
2
Adjustment of the air + fuel consumption (EN 13240):
