Kroeplin D Series, Руководство пользователя

Страница: 11 / 28

11
The gage should be verified before each series of measurements by
using a gage block.
If there is a deviation from the specified measurement the device
should be re-adjusted by using the rotating scale (E).
The measurements have to be repeated until the gage is
correctly adjusted.
In order to increase the accuracy of the measurement, the gage should be
adjusted in the same position in which later the measurement will be
effected.
The gage provides tolerance marks (D) that can be set to an acceptable tolerance range
which allows a quick measurement reading.
Part – No.:
1070-11 Covering glass (E)
1070-12 1 pc. Tolerance marks (D)
1070-03 Cover (G)
mm – gages inch – gages A1
*)
B1
*)
Holding unit Wooden box
D110 D610 0251-04 0251-04
8004-50 1732-45
D110T D610T 1533-51 0701-77
D110S D610S – –
D1R10 D6R10 0251-04 –
D1R10S D6R10S – –
D220 D720 0251-04 0251-04
D220T D720T 1533-50 0701-75
D220S D720S – –
D2R20 D7R20 0251-04 –
D2R20S D7R20S – –
*)
A1 Measuring contact (movable measuring arm)
B1 Measuring contact (fixed measuring arm)
– Measuring contacts are not interchangeable
Tolerance marks
Spare parts / Accessories
Display adjustment
E
D