Interface:
The interfaces are available as accessories and can be upgraded everytime.
The interfaces consist of a interfacecover and a data cable.
Type of interface:
- Mitutoyo-DIGIMATIC (cabel 1,5m) – order code:
1960-90
- USB (cabel 1,5m) – order code:
1960-91
- Mitutoyo-U-WAVE – order code:
1962-05
Installation of interface:
Please do not replace the short screws into long screw when tighten the battery cover, as the
circuit board will be damaged.
Tool:
Screwdriver for recessed head screws PH 1
Proceeding:
1.
Switch off gauge
2.
Loosen screw from battery cover
3.
Remove battery cover
4.
Mount the interfacecover carefully on
the plug.
5.
Lock interface cover carefully and look
after the cleanness and position of the
rubber seal!
6.
Connect the data cable.
7.
Switch on gauge
The Interface 1960-90 is compatible to Mitutoyo DIGIMATIC interpreters.
The Interface 1960-91 is compatible to USB 1.1 + 2.0. For software install check separat manual on CD.
Don´t use the data cable 1960-90 with interface cover 1960-91 and reverse!
Don´t use the U-WAVE connecting cable 1962-05 with interface cover 1960-91 and reverse!
1,5V MIGNON AA
0230-38
M2,5 x 6
0230-37
M2,5 x 12
