background image

krix.com

Krix Loudspeakers Pty Ltd
14 Chapman Road
Hackham SA 5163
Australia

T 61 8 8384 3433
F 61 8 8384 3419
[email protected]

Rev #10001

Please read these important safety instructions before you plug in this equipment.

Please retain these instructions for future reference.

This equipment is manufactured to a very high standard and it should give you many years of reliable service. To minimise the chance of 
any problems with this equipment, take note of the following:

This equipment uses electricity at very high voltages. To avoid injury to persons, fire or damage to the unit:
• 

Do not use the unit near water (or something with water in it) or in the rain.

• 

Do not allow the unit to get wet.

• 

Clean the unit with a dry cloth only – do not use solvents.  Unplug the unit before cleaning.

• 

Do not plug the unit into a power source other than the one specified.

• 

Make sure the power cable is protected.

• 

Make sure the power cable is not being pinched and that it cannot be walked on.

• 

Never disconnect the ground prong on the mains plug.

• 

When removing the power plug from the power source, do not pull on the cord.

• 

Do not open the unit.  Refer any service to qualified service personnel.

• 

Do not place any thing or any part of your body into the unit.

This unit may get hot when it is being used. To avoid injury to persons, fire or damage to the unit:
• 

Do not put the unit near any heating source.

• 

Keep the unit out of direct sunlight.

• 

Make sure all ventilation openings are clear.

• 

Do not cover unit with blankets or any other materials. 

• 

Do not place unit against curtains or furnishings.

This equipment is heavy. To avoid injury to persons:
• 

Be careful when you lift the unit.

• 

Install the unit on the ground so that it cannot fall onto anyone.

This equipment can cause extreme vibrations. To avoid injury to persons, fire or damage to the unit:
• 

Do not put the unit near things that might be damaged by vibration.

• 

Do not put the unit near things that might be moved by vibration (for example vases, candles or glass objects).

• 

Do not put objects on top of the unit.

This equipment is delicate. To avoid damage to the unit:
• 

If it starts to make a distorted or unusual noise, turn the volume down. If that makes no difference, turn the unit off and have it  

 

checked by qualified service personnel.

• 

If you are not going to use the unit for an extended period, unplug it from the wall socket.

• 

If there is a storm with lightning, unplug it from the wall socket.

• 

Never force any switches or controls. If they are difficult to operate, have the unit checked by qualified service personnel.

• 

Do not put any objects on the unit.

Avoid damage to your hearing. You only have one set of ears!
All sound equipment is capable of damaging your hearing or the hearing of others. Exposing your hearing to high volume levels for 
extended periods of time will cause permanent hearing damage. Even short periods at extremely high levels will cause permanent hearing 
damage. Children’s hearing is especially sensitive and extra care should be taken when exposing children to high volume levels. Hearing 
damage is cumulative and it may be too late when you find out that your hearing has been damaged. We recommend that you avoid long 
periods of exposure at excessive volume levels.

Содержание Tektonix













Отзывы: