background image

Figure 3

Figure 4

Figure 2

500mm

recommended 

minimum

A20 Orientation 

500mm

                               

Figure 1

INTRODUCTION

Introduction

The Hemispherix AS and A20 are in-ceiling 

loudspeakers featuring fully sealed back-boxes 

to control and maximise bass response, whilst 

keeping out dust and other ceiling inhabitants.
The Hemispherix A20 employs an acoustically 

optimised front baffle angled at 20 degrees, 

allowing its sound output to be projected 

towards your primary listening area. 
The Hemispherix AS employs a flat front baffle 

for uniform sound coverage in all directions 
The Hemispherix SPS features a stereo pair 

of inputs and a slim semi-open back box, 

providing a stero effect from a single source 

(figure 1).

Applications best suited to Hemispherix AS

The wide uniform coverage of the Hemispherix 

AS makes it the ideal choice for 2 channel stereo 

and background music applications. Its uniform 

coverage is ideally suited to any applications 

where  the  listening  area  is  not  confined  to  a 

specific part of the room. For example, hallways, 

dining  rooms,  office  spaces,  bedrooms  and 

multipurpose rooms (figure 2).

Applications best suited to Hemispherix A20  

The ability of the Hemispherix A20 to project 

sound toward your primary listening area makes 

it ideally suited to home cinema applications 

(figure 3). Dialogue will become more articulate, 

music will have better definition and surround 

effects will become more involving and 

realistic.  The  A20’s  ability  to  direct  more 

sound towards the listener results in less 

sound reflecting off walls and other surfaces 

in the room, creating a clearer, more three 

dimensional soundstage. The A20 may also 

be useful for background music applications 

where the speaker must be placed near a side 

wall  for  aesthetic  or  structural  reasons.  In  this 

application the A20 can be used to project 

the sound towards the centre of the room. 

Applications best suited to Hemispherix SPS

The Hemispherix SPS is perfect in small rooms 

where there is difficulty fitting a stereo pair of 

loudspeakers  (figure  4).    It  can  also  be  used 

where there is limited ceiling height.

If desired, two Hemispherix SPS loudspeakers 

may be wired together in parallel, or a single 

Hemispherix SPS may have both inputs wired 

in parallel from a single output.

   Hemispherix A20

   Hemispherix A20

   Hemispherix SPS

   Hemispherix AS

157

145

90

   Hemispherix AS

   Hemispherix SPS

3

Содержание HEMISPHERIX A20









Отзывы: