Krieger KRP150, Инструкция по эксплуатации, Страница: 6 / 12

headline bars
tabs
continuation tabs
notes
headline bars
tabs
continuation tabs
notes
headline bars
tabs
continuation tabs
notes
tabs co
ntinu
ation tabs
no
tes
w
ar
nings
6
SAFETY INFORMATION
POWER REQUIREMENTS
When a motorized appliance or a tool turns on, there is an initial surge of power to start. This surge of
power is referred to as the "starting load" or "peak load." Once started, the tool or appliance requires less
power to operate. This is referred to as the "continuous load" in terms of power requirements. You will need
to determine how much power your tool or appliance requires to start up (starting load) and its continued
running power requirements (continuous load).
Power consumption is rated in watts, or it can be calculated from amperes (amps). This information is
usually stamped or printed on most appliances and equipment. If this information is not indicated on the
appliance or equipment, check the owner's manual.
Multiply:
AC AMPS
X
110
(AC voltage) =
WATTS
This formula yields a close approximation of the continuous load of your appliance.
Multiply: WATTS X 2 = starting load for most appliances
This formula yields a close approximation of the starting load of most appliances.
model no. KRP150 | contact us 1-866-295-6775