Krick 20310, Инструкция по эксплуатации, Страница: 21 / 26

Page 21 © Klaus Krick Modelltechnik Knittlingen August 2002
Part
no.
Description reqd.
for
dive
model
reqd.
for
display
model
Qty. Material contained
in basic
set
20310
contained
in dive
set
20311
26 Drive motors x 2 Mabuchi 385 SH x
27 Motor mount x 2 ABS cutting part 2 mm x
28 Motor fastening screw x 4 M 2.5x8 mm x
29 Interference suppressors x 2 set x
30 Universal joint coupling x 2 from 2.3 to 2 mm Ø x
31 Dive rudder fin, aft,
display model
x x 2 ABS cutting part 2 mm x
32 Dive rudder, aft, display
model
x 4 ABS cutting part 2 mm x
32a Dive rudder, aft, dive
model
x 4 ABS cutting part 2 mm x
33 Trunk tube for side rudder x x 2 Brass tube 4 x 0.45 x 10
mm x
34 Side rudder x x 2 Finished article x
35 Rudder lever, side rudder x 3 Finished article x
36 Connecting wire for side
rudder lever
x 1 1 Steel wire 0.8 x 40 mm x
37 Control wire for Bowden
cables
x 2 Steel wire 0.8 x 150 mm x
38 Setting ring for Bowden
cables
x 2 Setting ring 2 mm with grub
screw x
39 Bowden cable seal x 2 Silicon hose total 2x5x40
mm x
40 Yoke x 2 Steel M2 x
41 Solder connectors x 2 Steel M2/2.1 mm x
42 Servo holder x 2 ABS cutting part 2 mm x
43 Dive rudder fin, aft, dive
model
x 4 ABS cutting part 2 mm x
43a Dive rudder, aft, dive
model
x 4 ABS cutting part 2 mm x
44 Dive rudder blade, fore,
display model
x 4 ABS cutting part 2 mm x
45 Dive rudder fin, fore,
display model
x 4 ABS cutting part 2 mm x
45a Dive rudder fin, fore,
dive model
x 4 ABS cutting part 2 mm x
46 Dive rudder shaft,
display model
x 1 cut from round brass
material 3x95 mm, part 48 x
47 Trunk tube for dive
rudder, fore
x x 2 Brass tube 4x0.45x10 mm x
48 Dive rudder shaft,
dive model
x 1 Round brass material 3x128
mm x
49 Screws for dive rudder x 2 Tin screw 2.2x45 mm x
50 Rudder blade halves, dive
rudder, dive model
x 2 ABS deep drawn part 1.5
mm x
51 Rudder lever, dive rudder,
fore
x 1 Finished article x