Seite 3 © Krick Modelltechnik, Germany, June 2015
12. Part 39. The main deck can now be
fitted and glued into place. When dry
sand the hull to until the edges are flush
with the deck.
13. Parts 40 to 43. Fit the rear deck
edge' 40 into position to support the rear
deck cover 41 Glue the forward hatch
cover 42 to the deck. Fit and glue in place
the deck bulkhead 43.
Before proceeding We recommend you
paint and detail the hull at this stage.
14. Parts 45 to 55. Assemble the cabin
frame as shown in drawing above.
Place in position on the main deck and
leave to dry.
When the glue has dried, fit and glue in
position the cabin sides 52. Carefully
mark out the roof panel as dimensioned
in drawing 8.
