1. SAFETY WARNINGS
-‐
This appliance is not intended for being used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should not play with the appliance. Cleaning and maintenance must be supervised by an
adult.
-‐
For additional protection, the installation of a residual current device (RCD) having a rated residual
operating current not exceeding 30mA is advisable in the electrical circuit. Ask your installer for
advice.
-‐
If the power cord is damaged, in order to avoid risks, it should be replaced by the manufacturer,
maintenance department or similar sector professionals.
-‐
This appliance is not intended to be operated by means of an external timer or separate
remote-‐control system.
-‐
Never recharge the battery when the weather is below 0ºC or above 40ºC.
-‐
Avoid recharging the battery in direct sunlight or near a radiating heat source.
-‐
Never recharge the battery continuously over 24 hours.
-‐
Never put the clipper into water. To clean the housing use only a cloth slightly dampened with
water or mild soap solution.
-‐
It is normal if the clipper become warm while using or recharging.
-‐
Keep the clipper out of reach of children.
-‐
Do not attempt to repair or move any part of the clipper by yourself. If there is anything irregular
about the clipper, please have it inspected at an authorized service center.
2. HOW TO USE
This hair clipper is designed for professional use to cut hairs and beards. The operation of the clippers is
very easy, suitable for family use. It has a refine appearance and very soft hand feeling. Adopting one
meticulous blades unit and one 600 mA battery, it has strong cutting strength.
This hair clipper uses only one special designed comb attachment. The clipper uses rechargeable battery.
Take advantage of the cord design, you can work with it at any place and never worry about the use. The
blade is separable. It is convenient for cleanup and adding oil.
Please read these instructions carefully before use.
RECHARGING THE BATTERY
Make sure that it is switched OFF. Plug the adaptor into the clipper and then into a household wall socket,
and it is begin to recharge the battery. The clipper can work for about 45 minutes after being recharged for
8 hours.
USE
Simply push the switch to ON and the clipper starts working.
