KRESS KUX12P, Инструкция по безопасности и эксплуатации

Страница: 6 / 8

6
Rotary hammer
KUX12P
COMPONENT LIST
1.
ON/OFF SWITCH WITH VARIABLE SPEED
CONTROL
2. SWITCH LOCK-ON BUTTON
3.
FORWARD AND REVERSE ROTATION
CONTROL
4. FUNCTION MODE SELECTION SWITCH
5. AUXILIARY HANDLE
6. ADJUSTABLE DEPTH GAUGE
7. DUST PROTECTION CAP
8. TOOL HOLDER LOCKING SLEEVE
9.
RELEASE BUTTON FOR FUNCTION MODE
SELECTION SWITCH (See Fig. C)
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type Designation: KUX12P (X12P-designation of
machinery, representative of hammer)
Voltage 220-240V~50/60Hz
Power input 850W
No-load speed 1300/min
Impact rate 5500bpm
Impact energy 3.0J
Drilling capacity
max
Masonry 26mm
Steel 13mm
Wood 30mm
Protection class
/ll
Machine weight
2.8kg
ACCESSORIES
Auxiliary handle 1
Depth gauge 1
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING NSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
1. ON/OFF SWITCH WITH VARIABLE SPEED
CONTROL
Depress to start and release to stop your tool. This
tool has a variable speed switch (1) that delivers
higher speeds with increased trigger pressure - speed
is controlled by varying the pressure applied to the
switch. (See Fig. A)
2. SWITCH LOCK-ON BUTTON
Depress the on/off switch (1) then the lock on button
(2) (See Fig. A) release the on/off switch first and the
lock-on button second. Your switch is now locked on
for continuous use. To switch off your tool just depress
and release the on/off switch.
3. AUXILIARY HANDLE
Slide the handle onto the drill and rotate to the desired
working position. To clamp the auxiliary handle rotates
the handle clockwise. To loosen the auxiliary handle,
rotate the handle anti-clockwise. (See Fig. B)
WARNING: Always use the auxiliary handle.
4. FORWARD AND REVERSE ROTATION
CONTROL
With the drill pointing away from you, push the forward/
reverse-lever (3) to the left “ “ for forward rotation.
Push the forward/reverse-lever (3) to the right for
reverse rotation “ “.
WARNING: Never change the direction of
rotation while the tool is rotating, wait until it has
stopped.
5. ADJUSTABLE DEPTH GAUGE
Fit the drill bit into the chuck. Loosen the depth stop
by rotating the handle anti-clockwise. Slide the depth
gauge until the distance between the depth gauge end
and the drill bit end is equal to the depth of hole/screw
you wish to make. Then clamp the depth gauge by
rotating the handle clockwise.
6. FUNCTION MODE SELECTION (See Fig. C)
The operation of the gearbox for each application is set
with the function mode selection switch (4), to change
between functions, depress the release button (9) and
rotate the selector to the desired operating mode.
For simultaneous drilling and
impacting of concrete or
masonry, choose the Hammer
drilling position.
For drilling into steel, wood
and plastics choose the Rotary
drilling position.