KRESS KUF30.9, Инструкция по безопасности и эксплуатации, Страница: 9 / 12

9
20V Li-ion Blower KUF30.9
Using the blower
USER TIPS
- Hold the blow tube approx
180mm above the ground when
operating the tool.
- Use a sweeping motion from side
to side. Advance slowly keeping
the accumulated debris/leaves in
front of you.
- After blowing the debris/leaves
into a pile, it is easy to dispose of
the pile.
Caution!
-Do not operate the blower near
bystanders or pets.
-Use extra care when cleaning
debris from stairs or other tight
areas.
-Wear safety goggles or other
suitable eye protection, long pants,
and shoes.
- Keep bystanders away.
-Do not blow any hot flammable or
explosive materials.
See Fig. G, H
CLEANING THE TOOL
Clean the tool regularly.
WARNING!
- Keep your product dry. Under no
circumstances spray with water.
- To clean the tool, use only mild soap and a
damp cloth.
- Do not use any type of detergent, cleaner or
solvent which may contain chemicals that
could seriously damage the plastic.
- Self lubricating bearings are used in
your product, therefore lubrication is not
required.
ENVIRONMENTAL
PROTECTION
Disposal
The machine, its accessories and packaging
materials should be sorted for environmental-
ly friendly recycling. The plastic components
are labeled for categorized recycling.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater, VIC 3153, Australia