
Rev. Date: 11/11/20
Page 3
Make Sure!
•
Vacuum is sitting on level surface.
•
Both inlet and outlet hoses are attached and pushed on all the way to actuate safety switches, then secured with
hose clamps before operating.
•
Fan chamber is empty of foreign debris
before
starting as this can bind and stall your machine or damage the fan.
•
Fan chamber cover is in place and properly secured before turning vacuum on.
•
Vacuum is turned off
immediately
if hose is plugged.
•
Vacuum is turned off
immediately
if there is excessive vibration as the fan may be out of balance.
• Vacuum is placed in an open area so that it receives "fresh air" and allows hot air from the engine to exhaust.
• Vacuum is used in a ventilated area. Do not operate vacuum inside an enclosed truck, trailer or building structure.
Decals
Manufacturer information is provided here along
with machine model and serial number.
Rotating fan can be dangerous! Clothes, hair,
hands, etc. can get sucked into vacuum chamber.
Properly attach hoses before operation. Failure
to do this could cause serious injury or death.
Rotating parts can be dangerous! You can snag
clothes, hair, hands, etc. This can cause serious
injury or death.
During operation machine can eject flying debris.
Wear appropriate safety equipment.
Indicates that the Krendl Machine Company is in
compliance with EPA codes.
During operation if engine is off, key should be in
off position to perserve battery.