Kremlin-Rexson EOS 03-R440 Скачать руководство пользователя страница 16

Страница: 16 / 20

KREMLIN REXSON

- 15 -

N° 578.212.110-UK-1506



SEALS

First remove, the axis-lock, the closing ring, the bush used for the pump separation.

Disassembly

- Unscrew the hoisting ring (1) and remove
the washer (2).

- Remove the cover (3).

- Identify and disconnect the hoses (41).

- Remove the elbows (40).

- Unscrew the 2 screws (5) with a hexagon
key size 5mm and remove the u-bolt (4).

- Unscrew the 4 screws (49) with a hexagon
key size 3mm.

- Unscrew the screw (7) with a hexagon key
size 4mm and remove the cam (8).

- Unscrew the 4 screws (22) with a hexagon
key size 6mm and remove the cover (21).

Remove

the

seal

(25)

with

flat

screwdriver.

- Remove the piston (28) and piston rod (17).

Remove

the

seal

(33)

with

flat

screwdriver.

- Remove the ring (32) with a half round
tongs.

- Remove the seal (25).

- Remove the seal (23).

- Remove the ring (29) with a half round
tongs.

- Remove the scraper seal (31) with a flat
screwdriver.

Remove

the

seal

(30)

with

flat

screwdriver.

Assembly

Grease slightly the seals.

- Install the seal (30) into the cylinder.

- Install the scraper seal (31) into the
cylinder.

- Install the ring (29) with a half round tongs.

- Install the seal (23) on the cylinder.

- Install the seal (26) into the cover.

- Install the seal (25) into the cover.

- Install the ring (32) with a half round tongs
on the piston (28) and piston rod (16)
assembly.

- Install the seal (33) in the piston grooves
(28).

- Lubricate the cylinder (15).

- Install the piston (28) and piston rod (16)
assembly into the cylinder (15).

Содержание EOS 03-R440





















Результаты поиска

Содержание EOS 03-R440

Отзывы:

Похожие инструкции для EOS 03-R440

Бренды по названию

Популярные бренды

Kremlin-Rexson EOS 03-R440, Перевод с оригинала инструкции

Результаты поиска

Содержание EOS 03-R440

Отзывы:

Похожие инструкции для EOS 03-R440

Бренды по названию

Популярные бренды