Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or the
up and down keys on the remote control to select: INPUT
TRIGGER.
2.
Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the last input trigger setting. the default mode is:
NORMAL.
3.
Use the level control knob or the up and down keys to select
the desired
option: OFF, NORMAL, or THEATER.
4.
Press the enter button or key to confirm the selection. The front
panel display reads: INPUT TRIGGER.
OFF
The S-300i does not respond to 12 V input trigger commands.
NORMAL
The S-300i responds to 12 V input trigger commands.
THEATER
The S-300i responds to 12 V input trigger commands, and the input for
which theater mode is enabled is selected automatically. See Theater
Mode, on page 19.
Output Trigger
This function enables you to turn the 12 Volt output trigger (24)
on or off, or configure it with a delay of up to 30 seconds. The
options are: OFF, ON, DELAY.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or vol
ume up and down keys (7) on the remote control to select:
OUTPUT TRIGGER.
2.
Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the default mode: TRIGGER.
3.
Use the level control knob or volume up and down keys to
select: OFF, ON, or DELAY.
2 2
Krell S-300i
Optional Configurations,
c o n t i n u e d
