manualshive.com logo in svg

Krell Industries CIPHER, Руководство владельца

Поделиться
Скачать
Krell Industries CIPHER Скачать руководство пользователя страница 12

12

Unpacking and Placement

This section describes the procedures for safely unpacking and placing your

CIPHER SACD/CD Player. The CIPHER is shipped in 1 carton consisting of the

SACD/CD Player and an accessory box. 

Opening the CIPHER Shipping Carton

The CIPHER shipping carton measures 22 in. (55.9 cm) wide by 12 in. (30.5 cm)

high by 22 in. (55.9 cm) deep.

CIPHER Chassis.

This measures 17.3 in. (43.8 cm) wide by 6 in. (15.3 cm) high

by 17.3 in. (43.8 cm) deep, and weighs 29 lbs. (13.2 kg).

To Remove the CIPHER from the Shipping Carton

1.

Open the shipping carton and open the top flaps. The carton contains these

items:

1 CIPHER SACD Player

1 Accessory box containing the following:

1 IEC Connector (AC Power) cord

1 12 VDC (12 V trigger) cable

1 Remote control

2 AAA-size 1.5 Volt batteries for the remote

1 T-10 Torx wrench for the remote control

1 Packet containing the Quick Setup Guide and the Warranty

Registration Card

2.

Remove the accessory box and place to one side.

3.

Lift out the removable front piece of foam.

4.

Carefully lift out the CIPHER SACD/CD Player. It is quite heavy, so get a firm

grip on it before lifting, or ask a friend to help.

5.

Place the CIPHER in a safe location, and remove the protective plastic wrap-

ping.

Notes

If any of these items are not included in the shipping box, please contact your authorized

Krell dealer, distributor, or Krell for assistance.

Save all packing materials. If you ship your CIPHER in the future, repack the unit in its origi-

nal packaging to prevent transit damage. See Return Authorization Procedure, on page 30,

for more information.

SECTION

TWO

continued

Содержание CIPHER



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды