background image

15

Warranty

 

We warrant your new pool  cleaner machine unit to be free from defects in material and workmanship for  
2 YEARS from date of purchase, subject to our standard conditions of sale. Please return the attached reply card 
to ensure your warranty is  recorded.

Standard Conditions of Sale.

The WARRANTY  excludes:
•  Defects in the hose. (Genuine Super Sweepy hoses are warranteed for three years against 
    manufactured defects.)
•  Super Sweepy warranty terms and conditions apply.
•  Normal  wear and tear of the Footpad and Suction seal. These must be checked  
    monthly and replaced when worn.
•  Damage due  to abnormal use, lack of care, negligence, undue exposure to sun,heat, 
    and  all such acts or omissions beyond our control.
•  Damage  caused by an incorrect chemical balance in the swimming pool.
•  Any  obligation other than the obligation to repair or replace defective parts.
•  Discolouration of parts. (Your Super Sweepy may become discoloured as a result of  
    being subjected to use in your swimming pool. Such discolouration, however, shall in 
    no way affect the cleaner’s operating ability.) The Super Sweepy Warranty is given in place
    of all warranties, guarantees,express or  implied, of merchantiability, fitness for particular
    purpose, or  otherwise.
•  The  warranty is not transferable

Содержание Super Sweepy

















Отзывы: