Fig. 26: Slide the insulating washer over the seal screw; screw head piece onto the seal screw
using a hexagon nut
5.
Slide insulating washer ( Fig. 26/2) over the seal screw and screw the head piece onto the
sealing screw using the hexagon nut ( Fig. 26/1), but do not tighten!
Fig. 27: Insert complete valve needle into the main element
6.
Insert the complete valve needle ( Fig. 27/1) from the back into the main element and push
forward up to the stop.
Fig. 28: Push the spring over the needle bolt into the main element
7.
Push the spring ( Fig. 28/1) over the needle bolt into the main element.
Operating instructions
T-Dok-653-GB-Rev.0
[email protected], www.krautzberger.com
GB–36