Krautzberger KS-1, Руководство по эксплуатации, Страница: 15 / 24

15
o
Pre-atomiser nozzle
The pre-atomiser nozzle (104) accelerates the material flow and helps to improve the
spray profile. This means that the operator can work using (in some cases) considerably
reduced material pressure and/or larger material nozzle. A large material nozzle - and an
accordingly slower material flow speed - reduces the risk of blockage. The pre-atomiser
nozzle should be chosen to suit the size of material nozzle (see table of airless nozzles in
the Krautzberger GmbH order catalogue). The pre-atomiser nozzle (104) is mounted
directly behind the material nozzle (102) instead of the gasket (3).
o
Adjustable material nozzle
The adjustable material nozzle (105) allows adjustment of the spray angle.
o
Nozzle reversal switch
The nozzle reversal switch (107) can be used to rapidly remove a nozzle blockage. The
nozzle is turned in the retainer by 180° and the ma terial feed briefly opened until the
blockage has been flushed away.
o
Material filter
A material filter can be installed in front of the material connection (27) to prevent
blockage. This is particularly advisable when using small airless nozzles. The filter
screen size should be chosen to suit the nozzle size (see table of airless nozzles in the
Krautzberger GmbH order catalogue).
o
Nozzle extensions
Nozzle extensions are particularly suitable for the coating of cavities such as pipes,
canisters, cans or other containers. In many cases it is possible to adapt the length and
shape of the nozzle extension to the special requirements on the customer's premises.
Ready-made nozzle extensions are also available (see Krautzberger GmbH order
catalogue).
(!) Caution
When working with a nozzle extension, note that explosive mixtures can be created
extremely easily due to the interaction of flammable materials and air in cavities! Ensure
adequate ventilation!