Krautzberger HS 25 Series, Руководство по эксплуатации, Страница: 14 / 29

5.2.2 Changing the air and fluid nozzles
Removing the nozzles
Fig. 7: Removing the nozzles
1. Loosen the knurled nut (Fig. 71)
2. Remove the air nozzle (Fig. 7/2).
3. Activate and hold the draw-off lever (Fig. 7/5).
4. Unscrew fluid nozzle (Fig. 7/3).
Always change the fluid nozzle (Fig. 7/3) and fluid needle (Fig. 7/4) at the same time
(
Ä Chapter 5.2.3 „Changing the fluid needle“ on page 15).
Attaching the nozzles
1. Activate and hold the draw-off lever (Fig. 7/5).
2. Tighten the fluid nozzle (Fig. 7/3).
3. Release the draw-off lever (Fig. 7/5).
4. Attach the air nozzle (Fig. 7/2) and tighten it with the knurled nut (Fig. 7/1).
Operating instructions
T-Dok-009-GB-Rev.0
mail@krautzberger.com, www.krautzberger.com GB–14