Krautzberger HS 25 HV1, Руководство по эксплуатации

Страница: 27 / 57

7.3 Maintenance schedule
Automatic turntable
Interval Maintenance work Personnel
After each use Clean hand-held spray gun ( Ä Chapter 7.5
‘Clean hand-held spray gun’ on page 27 )
Operator
if needed Change fluid and air nozzle (
Ä
Chapter 7.6
‘Change air and fluid nozzles’ on page 29 )
Qualified personnel
Change fluid needle (
Ä
Chapter 7.7 ‘Change
fluid needle’ on page 30 )
Tighten needle seals ( Ä Chapter 7.8 ‘Change
seals’ on page 32 )
Change needle seals ( Ä Chapter 7.8 ‘Change
seals’ on page 32 )
7.4 Work after completed maintenance
Upon completion of the maintenance work, the following steps must be carried out:
n
All screw connections that were unfastened during the maintenance must be checked for a
tight fit.
n
Check whether all covers and protective equipment have been properly attached.
n Ensure that all tools, materials and other equipment have been removed from the work area.
n Clean the work area. Properly dispose of the leaked fluids.
7.5 Clean hand-held spray gun
WARNING!
Danger of injury due to improper cleaning!
– Adhere to the safety data sheets of the cleaning product manufacturer.
– Do not fully immerse the hand-held spray gun in a cleaning product.
Hand-held Spray Gun HS 25
ENGLISH
HS 25, HS 25 HV1, HS 25 HV3 GB–27