Fig. 12: Check the seals
7.
Check the seals (Fig. 12/1 to 8) for damage, replace if necessary.
Attaching the fluid needle
Fig. 13: Attaching the fluid needle
1.
Push the fluid needle (Fig. 13/2) and spring (Fig. 13/3) into the valve shaft pipe (Fig. 13/1).
2.
Screw the nut (Fig. 13/4) onto the valve shaft pipe (Fig. 13/1).
Fig. 14: Attaching the fluid needle
3.
Push the entire valve shaft (Fig. 14/2) into the main element (Fig. 14/1).
4.
Attach the spring (Fig. 14/3) and tighten it with the entire closing piece (Fig. 14/4).
Automatic spray gun A-10
ENGLISH
■
200-0148
GB–27