WARNING!
Hazardous media / contamination of persons and equipment
Possible consequences: Fatality or serious injuries, property damage
–
Ensure the resistance of the device against the medium that is to be conveyed
–
Always adhere to the safety data sheet of the medium that is to be conveyed The system
owner is responsible that the safety data sheet is present and up-to-date
–
The safety data sheet of the conveyed medium is always authoritative for the initiation of
countermeasures in case of a leak of the conveyed medium
–
Adhere to the general limitations with respect to viscosity limits, chemical stability and
density
WARNING!
Risk of fatal injury, risk of injury or property damage due to damaged or disconnected
lines!
Damaged or disconnected lines can cause death, serious injuries or property damage due to
whip-like movements and the spraying of fluids.
Note:
–
Check the fluid lines and pressure lines for damage and a tight fit prior to every work
process.
WARNING!
Risk of injury due to hot surfaces!
The surfaces of components can become very hot during operation. Direct contact with hot
surfaces causes severe skin burns.
–
Do no touch hot surfaces during operation, wear protective gloves if necessary.
–
Ensure that all surfaces have sufficiently cooled down prior to starting any work.
7.2 General information about commissioning and start-up
Adhere to the following general information for commissioning:
n
Only carry out the commissioning of the automatic spray gun pursuant to the steps described
in this operating manual.
n
Check the material and compressed air hose lines for damage and tight fit before each use.
n
Always observe the applicable country-specific safety, accident prevention, occupational
safety, and environmental protection regulations applicable for the area of use for the auto-
matic spray gun.
Operating instructions
T-Dok-214-GB-Rev.2
[email protected], www.krautzberger.com
GB–22
Содержание 200-0153
Страница 48: ......