KRAUSMANN U87020-00B, Руководство по эксплуатации

Страница: 6 / 20

6
U87020-00B KRAUSMANN POWER TOOLS
failure.
Do not place batteries in a tool box or pock-
et with nails, screws, keys, etc. Fire or injury
may result.
Have your power tool serviced by a
qualified repair person using only genuine
replacement parts. This will ensure that the
safety of the power tool is maintained.
Follow instruction for lubricating and chang-
ing accessories.
Keep handles dry, clean and free from oil
and grease.
Service
The KRAUSMANN
®
UN1 POWER 20V
battery can be used with all 20V
power tools bearing this marking.
3. Specific safety regulations
6
4
3
8
10
11
12
13
14
9
accident. Check tightness of screws carefully
before operation.
In cold weather or when the tool has not
been used for a long time, let the tool warm
up for a while by operating it under no load.
This will loosen up the lubrication.
A
lways be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
Hold the tool firmly with both hands.
Κ
eep hands away from moving parts.
Do not leave the tool running. Operate the
tool only when hand-held.
Do not point the tool at any one in the area
when operating. Parts could fly out and injure
somenone seriously.
Do not touch parts close to the bit immedi-
ately after operation; they may be extremely
hot and could burn your skin.
Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
Wear ear protectors. Exposure to noise can
cause hearing loss.
U se auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
H old power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring
or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
W
ear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
Β e sure the bit is secured in place before
operation.
U nder normal operation, the tool is designed
to produce vibration. The screws can
come loose easily, causing a breakdown or
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher -
ence to electric power tools’ safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury.
5
7
1
2
Additional safety regulations for
angle grinders
Do not cut or grind light metals that contain
over 80% magnesium as these types of met -
als are flammable.
Do not use other accesosries apart from
cutting and grinding discs. Make sure that the
disc’s adjusted speed is equal or higher than
the value that is inscribed on the plate.
D
o not cut pieces that require a maximum
depth that is longer than the size of the disc.
Make sure the disc has the correct dimen-
sions and matches properly on the axle.
U se discs with great caution according to the
instructions supplied with the disc.
Inspect the disc before use. Do not use bro-
ken or damaged discs.
M
ake sure the disc is fitted according to the
instructions.
A
fter fitting the disc, operate the machine for
a while under no load, in a safe place.
If the machine produces intense vibrations or
you notice damage on the disc, turn off the
English | EN