KRAUSMANN U63012-00, Руководство по эксплуатации

Страница: 16 / 20

16
U63012-00 KRAUSMANN POWER TOOLS
English | EN
Do not use other accessories apart from
reciprocating saw blades.
Use blades with great caution according to
the instructions supplied with the saw blades.
Inspect the blade before use. Do not use
broken or damaged blades.
M ake sure the blade is fitted according to the
instructions.
After fitting the blade, operate the machine
for a while under no load, in a safe place.
Apply the machine to the workpiece only
when switched on. Otherwise there is danger
of kickback when the cutting tool jams in the
workpiece.
Do not use adjusters or other aids to fit saw
blades with a different blade socket.
M ake sure the piece is properly supported or
tightened.
Use only undamaged blades that are in
perfect condition. Bent or dull blades can
break, negatively influence the cut, or lead to
kickback.
Always wear safety goggles, earplugs and
other protection gear, like working gloves,
protective clothing, hard hat etc.
M ake sure the ventilation openings are kept
clean. Especially when working in environ-
ments rich in dust.
I n order to prevent damage to the tool’s
internal parts, do not use cleaning brushes,
metallic or similar objects to remove dust.
SAVE THESE INSTRUCTIONS
WARNING:
Misuse or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
4. Functional description
and specifications
Intended use
The device is intended for sawing wood, metal and
plastics. Following these instructions will ensure
safe installation and operation of the device.
Insert the plug on the charging unit into
a power socket and turn the power on if
required.
Insert the battery with the charging output
interface to the charging port. The charging
time depends on the capacity of the battery
and the type of the charger.
Place the battery pack and charger on a flat
non-flammable surface and away from flammable
material when re-charging the battery pack.
Charging the battery
Always switch off the tool before insertion or
removal of the battery pack. To remove the battery
pack, withdraw it from the tool while pressing the
release button. To insert the battery pack, slide the
pack into the body of the tool. Always insert it all
the way until it locks in place with a little click. If not,
it may accidentally fall off the tool, causing injury
to you or someone around you. Do not use force
when inserting the battery pack. If the pack does
not slide easily, it is not being inserted correctly.
Removing or inserting the battery
pack
WARNING:
When battery charge runs out after continuous use or
exposure to direct sunlight or heat, allow time for the tool
to cool down before re-charging to achieve the full charge.
Power supply
No load speed
Stroke length
Cutting capacity in
Wood
Steel
Plastic pipe
Tool weight
12 V
0-3000 rpm
15 mm
65 mm
8 mm
50 mm
1,05 kg
Tool U63012-00
The three lights 5 on the side of the tool body (red,
orange, green) indicate the battery capacity status.
Battery capacity indicator
Red: 0% - 20%
O range: 20% - 60%
G reen: 60% - 100%.