6
1. Cut Paper Template
2. Trace Template
• Use scissors to cut along the inside line of the paper template
• Compare cut template with sink to ensure proper size
• Place the cut-out template in the desired location on the countertop and
trace with a pencil
• Mark the faucet hole centerline on the countertop using the vertical line
in the center of the paper template
NOTE: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink
Clip Location
Rim of Lavatory
Cut Along This Line
14.25” (362mm)
14.25” (362mm)
R61mm
R2.4"
2” (50.8mm Suggested)
Finished Wall
2.5” (63.5mm Suggested)
331mm
309mm
12.2”
13.0”
Clip Location
Model No.
KSU-7MW
Rim of Lavatory
Allow a minimum of 4.5” (114.3mm
from wall for faucet placement
clearnace before cutting)
NOTE:
When plotting template full size:
Make sure horizontal and vertical dimensions
match the dimensions labeled in the template
Cut Along This Line
