2
Prior to Installation
•
Make sure that the cold and hot water lines are turned off
•
Wrap all threaded connections with Teflon tape. Always wrap in a clockwise direction
•
Cover your drain to avoid losing parts
•
Do not disassemble the main faucet body, as it has been factory assembled by Kraus
for stress-free installation.
•
Using condition: Working pressure at 0.05-1.0MPa (including cold & hot water
pressure) with applicable water temperature: 40C-900C
•
Remove the check valve assembly (24) at the end of the hose (10)
•
Discard plastic caps from the hot and cold inlets
Tools you will need:
Phillips
Screwdriver
Adjustable
Wrench
