Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
P R O B L E M
C A U S E
A C T I O N
Leakage under the
handle
Bonnet nut (5) has
come loose
Remove the cover button (1).
Loosen set screw (2) with hex
wrench (17). Remove the
handle (3). Unscrew cap (4)
(by hand only). Tighten bonnet
nut (5) with an adjustable
wrench
Aerator drips or has
inconsistent water ow
pattern
Aerator (8) is dirty or
not seated properly
Water will not shut o
completely
Cartridge may need to
be adjusted or replaced
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1.
Rinse with clean water & dry with a soft cloth
2.
Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3.
Do not use cloth with a coarse surface
4.
Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
10
9
11
12
13
Hexagon Nut
Hot
Water
Cold
Water
1
11
Close
Open
Left
Hot Water
Push
25˚
90˚
12
13
Remove the cover button (1).
Loosen set screw (2) with hex
wrench (17). Remove the
handle (3). Unscrew cap (4) (by
hand only). Tighten bonnet
nut (5) with an adjustable
wrench. Remove the cartridge
(7). Check for cracks
There is leaking from the
sink drain at the base of
the sink.
The sink has a rough or
irregular surface.
Apply additional silicone
sealant to the beveled side of
and test for leaks
11
water.
hose connectors is dirty.
water valve and unscrew the
hose connectors from water
supply lines. Clean the screen
in the water lines with hot
water, removing any debris
or calcium build up.
Unscrew aerator (8) with aerator
wrench (9) and clean out debris
