24
Manual
www.kraun.it
4.2.2 WDS Security Setting
WDS Security Setting is to protect the data safety of wireless bridge.
The security setup page of Point to Point Bridge and Point to Multipoint Bridge is as the picture below.
WDS security setting provides three encryption modes: WEP encryption, TKIP encryption and AES encryption.
h
h
WEPhKey:
You can set the WEP key in ASCII code or Hexadecimal code.
h
h
Key:
You can choose ASCII code (5 or 13 ASCII codes, illegal characters like “/” are forbidden) or Hexadecimal
characters (10 or 26 Hexadecimal characters).
h
h
TKIP/hAEShKey:
TKIP/AES is an encryption mode based on WPA and WPA2.
h
h
Key:
Key characters are ASCII codes from 8 to 63.
Note:
The encryption mode and password of each device in the bridge must be consistent, thus the connection
can be established. You are recommended to encrypt the bridge to protect the wireless bridge.
The security setup page of wireless repeater is as follows:
Security setting of wireless repeater can be divided into AP security setting and WDS security setting. AP security
setting focuses on wireless client access, while WDS security setting focuses on wireless bridge connection. AP
security setting appears only when wireless client accesses are permitted in wireless repeater mode. Please refer
to Chapter 4.2.1 for AP security setup.
Содержание KR.KZ
Страница 35: ...35 Manual www kraun it ...
