6
BEFORE USING YOUR TOASTER
9.
Use a damp cloth to wipe exterior of the toaster
10.
Do not use any sprays or abrasive cleaners
11.
Do not immerse or wash the toaster with water
12.
Preheat the toaster to the highest setting for 5 or more minutes.
13.
Allow the lubricant to burn off the heating elements. A light amount of smoke is
normal during this process.
USING YOUR CONVEYOR TOASTER
1.
Plug in your toaster into the correct outlet and power light will come on.
2.
Decide if you want the bread to exit via front chute or back chute. See above
images for installation.
3.
Turn the knob for toast control to desired position. Position “3” is recommended.
You will notice the belt speed changes as you change this setting. The higher the
number chosen, the slower the belt moves. This will adjust the darkness of the
toast. Setting 6 is the darkest toast and slowest belt speed.
4.
Select either bread or buns on the control panel. Selecting bread means both top
and bottom elements are on. Selecting Buns will turn off the top element.
5.
After the bread is finished toasting, remove it from the chute.
6.
Depending on the type of bread and freshness, it may be required to run the bread
through the toaster more than once. Fresh, soft bread doesn’t toast as well as
bread that has had time to settle.
7.
After finished, return the knob to off and unplug the unit.
8.
If any damage to the power cord is noticed, it must be serviced by an authorized
agency or returned to the manufacturer.
