Kranzle LX 2000, Руководство по эксплуатации

Страница: 10 / 19

18 19
3. The LX-series is a movable high-pressure
cleaner with sturdy trolleys ideally
suited for difficult terrain.
For steering the high-pressure cleaner
put the foot against the tipping
support and then pull the device
towards you.
2. For moving the high pressure cleaner
to the place of use, please release
locking break.
The high-pressure cleaner must not
be pulled with connected water
supply hose!
1. Install the water inlet filter (available as
an option) at the water inlet.
Prior to putting the high pressure cleaner into operation make sure
that all safety instructions be observed.
Neither set up or operate the LX-series in rooms where there is a risk
of fire or explosion nor put it into puddles. Do not use the high pressure
cleaner under water. If, none the less, the high pressure cleaner is
operated in a hazardous area, the applicable safety regulations are
to be observed.
8. After insertion of the lance, release
retaining sleeve and make sure that
the lance is in a secure position.
Grease quick release nipple regularly
using acid-free grease.
7. First pull back the retaining sleeve
of the safety trigger gun, then
insert lance into the plug coupling
sconnection of the safety trigger gun.
6. Pull back securing sleeve of the HP
hose and plug it on trigger gun with
safety catch.
Release securing sleeve and check
for tight fit.
4. Release fixing of hose drum and fully
uncoil it after that. (When using high
pressure hose extensions take care
that the max. length of 20 m is not
exceeded!)
5. Hose drum must be unrolled
completely.
Provide for firm and pressure-tight
connection of HP hose to pump outlet.
Prior to insertion, check plug coupling connection of lance for
cleanliness (sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
Accessories may only be connected to a Kränzle-approved trigger gun
with safety catch.
Putting into operation Putting into operation