background image

8

9

Safety notes - This is prohibited!

Safety notes - This is prohibited!

Never direct the high pressure jet at power sockets  

or any other electrical installations! Within the 

working area, all live parts are to be protected 

from both water jet and spray mist.

Apply the safety catch on the safety trigger gun 

after each use in order to prevent 

unintentional spraying!

Only use a power supply cable in perfect working 

order! Do not damage or improperly repair the 

power cable (tearing, squeezing, running over, ...).

Never pull the high pressure hose if it has formed 

kinks or “nooses”! Never pull the high pressure 

hose over sharp edges!

Never direct the high pressure jet at people or  

animals! Never direct the high pressure jet at  

yourself or other persons, not even to clean  

clothing or shoes.

Never direct the high pressure jet at the high 

pressure cleaner itself! The high pressure cleaner 

may not be placed within reach of the high 

pressure jet spray mist!

Always pay attention to the underbody lance  

resting on the surface! Bear in mind when using  

a curved or angled spraying lance that there is  

a significant amount of torque in the recoil!

(The underbody lance is available as 

optional accessory).

Содержание bully 1000 TST




















Отзывы: