ENGLISH
- 4
Checking the air outlet filter
- Loosen the screws (26 Fig. 18) and re-
move the cover 2737 Fig. 18).
- Remove the foam tank (28 Fig. 19) and
the texture sponges (29 Fig. 20) if any.
- Clean the sponges with a blast of air (Fig.
21).
The filter sponges can be washed in
warm water and must only be replaced
once they are completely dry; if too dirty,
replace them with new ones.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Checking, cleaning the motor
protection filter and the floating
functionality
- Remove the cylinder head as previously
indicated.
- Remove the filter (4 Fig. 24).
- Check If the floater (30 Fig. 23) is in
good condition and if it moves freely in its
space.
- Wash the filter (4 Fig. 24) with warm run-
ning water removing all foreign particles
and reassemble only after a thorough
drying.
- Insert the filter (4 Fig. 24) on the motor
hood then through the straps (31 Fig. 24)
hooking the elastic part on the top of the
filter with washers (32 Fig. 24).
- Reassemble in reverse order.
PROBLEM
CAUSE
SOLUTION
The vacuum cleaner does
not work.
Switch not pressed.
Press the switch.
Plug not inserted.
Insert the plug into the sock-
et.
No current.
Check the power supply
line.
Suction is not satisfactory.
Paper bag full.
Replace the dust bag.
Filter elements clogged.
Clean the filter elements.
Accessories or tubes
clogged.
Check and clean the flexible
hose and the suction noz-
zle.
Suction nozzle squeegee
worn or damaged.
Check and replace the
squeegee.
Manuale_8060023_KRANZLE Ventos 50ID_1ed_0-2022.indd 4
Manuale_8060023_KRANZLE Ventos 50ID_1ed_0-2022.indd 4
18/02/2022 15:06:48
18/02/2022 15:06:48