Kramer WP-571, Руководство пользователя, Страница: 10 / 16

8 WP-571/WP-572 - Defining the WP-571 and WP-572
4.2 Defining the WP-572
The Kramer WP-572 HDMI Line Receiver accepts an encoded signal over TP
cable from the WP-571 (or any other DGKat compatible transmitter), decodes it
and converts it to an HDMI output.
The WP-572 is available in the following versions:
•
US (see Section 4.2.1 )
•
EU (see Section 4.2.2 )
4.2.1 WP-572 US Version
Figure 3 defines the front and rear panels of the WP-572.
Figure 3: WP-572 HDMI Line Receiver US Front and Rear Panels
# Feature Function
1 ON LED Indicates the following:
•
Lights red when receiving power only
•
Lights orange when power and either input or output are attached
•
Lights green when both an active input and output are attached
Note : If no input is connected to the transmitter the device goes into
the power save mode automatically (see Section 3.3 )
2 HDMI OUT Connector Connect to the HDMI acceptor
3 2-pin Terminal Block Connect to the supplied 12V DC power adapter (see Section 3.3 )
4 RJ-45 CAT-5
Connector Connect to the DGKat transmitter using DGKat cable (see Section 5 )